!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!
- 10
2.6
Change Diode, Capacitor, Switch and earphone Jack step:
Check the NG component first, heat up the weld position by using the solder iron,
remove the NG component, Place the confirming part at the right position, and
solder to fix it.
!
! ! ! ! ! ! ! ! ! ! ! ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2.7
Speaker disassembly and assembly step
According to the method of Master disassembly and assembly step, remove the
screw (4PCS 3*5TP2) from A to D in series (refer to picture1.9), take out of the
speaker and then welding the speaker wire by using the iron solder.
!
Confirm the polarity of the speaker wire.The black-white one should be welded at the
“+” poison, and the black one should be welded at “-” poison. ( refer to picture 2.1)
)
picture
!2/:*!
)
picture
!3/1*!
)
picture
!2/9*!
A
D
B
C