![background image](http://html1.mh-extra.com/html/vingtor-stentofon/clwt-135t/clwt-135t_installation-manual_1027979001.webp)
CLWT-135T Speaker Installation Guide
Item Number
Item Name
Description
2131000133
CLWT-135T
Ceiling Speaker WT, 100V, IP55, 6W
1
Dimensions & Mounting Procedure
1. Cut out a hole in the ceiling at Ø116 mm.
2. Lead the cable through the M20 cable glands and tighten them.
3. After connections are done, mount the back cover with the two screws provided.
4. Fasten the speaker to the ceiling by using the 2x fastening spring clamps.
5. Knock out and use the 3x fastening holes at Ø4.2 mm if additional tightening is required.
Make sure that the cables have the necessary length for maintenance.
Observe