9
17.Code Protection Function
The operation will stop if unauthorized codes are entered over 5 times.
The System will re-operate again after 45 sec.
18.Illumination
The LED Keypad will light up when pressing any button for easy operation in
the dark.
Remark
■
1. We recommend to use alkaline batteries in order to stabilize the power supply.
2. Do not mix alkaline battery with regular zinc-carbon ones or mixed brands.
3. Do not use any chemical liquid or lubricating oil with additives to clean the lock
body, it will damage the surface or even mainboard.
4. If there is any problem of the product, please contact your local retailer and send
back the product to us for repair or replacement.
Programming Code (PC)
10
■
Function Programming
Detect Left / Right Hand Door Installation
Enter PC
0
Remark : Please run the door-handing identifying process before initial setup or once
default settings are restored. Leave lock unlocked while programming.
Add New User Code
USER Code (UC)
Enter PC
1
Enter New UC
Remark :
Up to 6 sets of User Code can be saved. User Code should be 4-10 digits in length.
Delete An Existing User Code
Enter PC
2
Enter the UC
you want to
delete
Delete All User Code At once
Enter PC
3
Remark : Auto-locking and Keypad locking functions will be invalid when User Codes
are deleted. The lock can only be operated by key during that time.
Change Programming Code
Enter PC
4
Enter New PC
Toggle Autolock On/Off
Enter PC
5
Remark : The preset delay-time is 30 seconds, you can change the time by following
instructions below.
Repeat the steps to cancel the Auto-locking function.
