©2017 Spectrum Brands, Inc.
The procedure for adding user codes is different when the Mastercode is enabled. For instuctions on how to add user
codes when the Mastercode is disabled, see the Installation and User Guide that came with your lock.
1. Keep door open. Press the Program button
once. The Checkmark will flash five times and
you will hear five beeps.
2. Press Checkmark symbol once.
3. Enter Mastercode.
4. Press Lock symbol once.
5. Enter new user code.
6. Press Lock symbol once.
If programming is successful, the Checkmark
will illuminate and you will hear one beep.
If programming is unsuccessful, the “X” pattern
will flash three times with three beeps. Make
sure the user code is not a duplicate and that it is
between 4 and 8 digits during your next attempt.
Make sure the lock has room for an additional
code. If all user codes are filled, delete a code to
make room for this one. Make sure to enter a valid
Mastercode in step 3.
While the door is open and locked,
test the user code to
make
sure it unlocks the door.
66852 / 01
954
3 / 16
Technical Support
1-866-863-6584
www.kwikset.com
C
Adding User Codes with the Mastercode Enabled
