When the system reaches the desired, programmed set point in
COOL
mode
it will automatically begin cycling off or you may choose to turn it off. The
system time delay will activate before cooling again.
When cycling off by making the set point, the evaporator fan will remain
activated if
FAN
is selected. When the temperature rises above the set point,
cooling will begin automatically.
Turning the system
OFF
manually will turn the evaporator fan off also, impe-
ding the BioKool™
from restarting automatically. In
FAN
mode the supply air
fan and UV lights shut down when
OFF
is selected.
The hot air exhaust fan (condenser discharge) operates
exclusively in Cool mode and not in Fan mode.
Cycling Off
Press
ON
.
C
OOL
blinks when the time delay is complete. The hot air
exhaust fan will ramp up as refrigerant pressure builds. It is normal for this
fan to have a delayed start. Also, it’s normal for the fan to stop and start
during the operating process, especially in low temperatures.
Cool Mode
24
OPERATION CONTROL
Summary of Contents for BioKool KBIO1411
Page 2: ...FAMILY OF PRODUCTS...
