Unplug System
Remove any and all power sources from the unit.
Access And Remove The Filter
Loosen the two screws on the filter access door until the door opens. Access the blue
filter from the front panel. Pull it out from behind the door flanges.
Option One
In an open, well ventilated area blow out your blue pre-filter with compressed air
away from you or others. Ensure to blow in the opposite direction of air flow. When
facing the side you are blowing from, the cutouts for the door bracket should be on
the left side. Blow until there is no more particulate coming from the filter.
Option Two
Using a hose or a sink, direct a flow of water through the filter from the outlet side to
the inlet side. Wash and squeeze the filter until the water is clear.
Note
Before reinstalling the filter, ensure that the pre-filter is completely dry. Typically a
safe waiting time is three hours. This time will vary depending on conditions, so
double check that your pre-filter is dry before installation. In order to minimize
downtime; it is advised that you have two filters that can be switched out in order to
continue using your portable cooling system.
Replace | Install The Filter
The replacement pre-filter must be inserted the same direction as the original
pre-filter. Tuck the filter as deep as possible into the door flanges, or cutouts for the
door brackets. When looking at the inside of the front panel, the two squares go on
the left side so that the fastening screws go through the rectangular cutouts.
Latch The Panel Door Closed
Push front panel closed and tighten the screws until they are firmly secured.
FILTER MAINTENANCE
Cleaning The Pre Filter
15
Summary of Contents for BioKool KBIO1411
Page 2: ...FAMILY OF PRODUCTS...
