Right Side Wheel
4. Assemble right wheel assembly.
NZ416 Rev. 02/23/17
***CAUTION***
This equipment has been designed to be used for the game of field hockey only. Field equipment
must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net
or equipment framework at anytime! All fastenings must be checked to insure they are fully
tightened before and after each use of this product. Equipment not in use must be disassembled
and properly stored in a safe, secure area. Assembled field equipment should not be left
unattended. Remove nets when equipment is not in use. Do not use this equipment during the
threat of high winds. Field equipment must be checked for safety before and after each use. All
warning and safety labels included with this product must be visible at all times. Any modifications
to this or any Kwik Goal product will void any and all warranties.
1/2" Lock Nut
1/2" Flat Washer
Mounting
Bracket
5/8" X 3 1/2"
Hex Bolt
5/8" Jam Nut
Stop Plate
Large Nylon Washer
Apply two small (1/4” max) drops of
anti-seize to each side of washer.
Keep anti-seize close to center hole.
3/8" X 3/4" Socket Head Capscrew
3/8" Lock Nut
Tire and Wheel
Assembly
5/8" Lock Nut
Mounting
Bracket
Stop Plate
Tighten nut snug,
then loosen until
Mounting Bracket can
rotate on Stop Plate.
