background image

Mounting Bracket (2)

(Part# UZ690)

NZ416 Rev. 02/23/17

ASSEMBLY INSTRUCTIONS FOR 2F501 WHEELS

1.  Unpack all parts and check for damage that may have occurred during shipping.  If damage has occurred, 

notify trucking company immediately.  Lay out all parts.  Remove all cardboard and packaging immediately.  
Wet or damp packaging may damage contents.

2.  Read through entire instruction before beginning assembly and installation.

140 Pacific Drive Quakertown, PA 18951

(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869

Visit our website @ kwikgoal.com

     2017 Kwik Goal Ltd.

Tire and Wheel Assembly (2)

(Part# VZ349)

Stop Plate (2)

(Part# UZ1254)

Hardware
 

Note:  Hardware may be packaged separately 

      in one or more boxes.  Open all packages 
      before beginning assembly.
    

 

3/8” x 1” Hex Bolt 

(Part# TZ1)   

                      (4)

 

3/8" x 3/4" Socket Hd Capscrew 

(Part# TZ208)

 

(2)

 

3/8“ Lock Washer

(Part# TZ65) 

 

            (4)

 

3/8“ Flat Washer 

(Part# TZ60)

 

 

            (4)

 

3/8” Lock Nut

 (Part# TZ370)

 

 

            (2)

 

1/2” Flat Washer 

(Part# TZ297)

 

 

            (2)

 

1/2"  Lock Nut 

(Part# TZ28)

 

 

            (2)

 

5/8" x 3 1/2” Hex Bolt 

(Part# TZ369)

 

            (2)

 

5/8” Lock Nut 

(Part# TZ294)

 

 

            (2)

 

5/8” Jam Nut 

(Part# TZ108)

 

 

            (2)

 

Large Nylon Washer 

(Part# TZ204)

 

            (2)

Assembly Tools

9/

16

9/16”, 3/4” & 15/16”

Wrenches

Ratchet with

9/16”, 3/4” & 15/16”

Sockets

5/16” Hex

Wrench

Threaded Channel Spacer (2)

(Part# UZ691)

***CAUTION***

This equipment has been designed to be used for the game of field hockey only. Field equipment 

must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net 

or equipment framework at anytime! All fastenings must be checked to insure they are fully 

tightened before and after each use of this product. Equipment not in use must be disassembled 

and properly stored in a safe, secure area. Assembled field equipment should not be left 

unattended. Remove nets when equipment is not in use. Do not use this equipment during the 

threat of high winds. Field equipment must be checked for safety before and after each use. All 

warning and safety labels included with this product must be visible at all times. Any modifications 

to this or any Kwik Goal product will void any and all warranties.

Summary of Contents for 2F501
















Reviews: