Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
1/4” x 2” Eye Bolt
(Part# TZ23)
(2)
1/4” Lock Nut
(Part# TZ19)
(2)
1/4“ Flat Washer
(Part# TZ147)
(2)
3/8” X 1-1/4” Hex Bolt
(Part# TZ59)
(4)
3/8” X 2-1/2” Hex Bolt
(Part# TZ165)
(4)
3/8” Lock Nut
(Part# TZ197)
(4)
3/8” Flat Washer
(Part# TZ60)
(12)
3/8” Lock Washer
(Part# TZ65)
(4)
7/16” X 3-1/2”Bolt Carriage
(Part# TZ230)
(4)
7/16” Hex Nut
(Part# TZ211)
(4)
7/16” Lock Washer
(Part# TZ210)
(4)
7/16” Flat Washer
(Part# TZ171)
(4)
Assembly Tools
9/
16
7/16”, 9/16”, 5/8” & 3/4”
Wrenches
Ratchet with
7/16”, 9/16”, 11/16” & 3/4”
Sockets
AND
Secure Net Clip
Driver (1)
(Part# VZ140)
Back Board (1)
2F501(Part# UZ735)
Net (1)
2F501(Part# 3F501)
Ground Anchor (4)
Includes Hex Bolt
and Flat Washer
(Part# 10B103 Set of 4)
16”
Ground
Anchor Peg (4)
(Part# 10B1404 Pack of 4)
Anchor Plate (4)
(Part# UZ736)
Anchor Bag (2)
(Part# 10B1605)
Channel Spacer (2)
(Plastic)
(Part# UZ812)
Secure Net Clip (50)
(Part# 10B3401 Pack of 100)
NZ261 Rev. 09/26/18
***CAUTION***
This equipment has been designed to be used for the game of field hockey only. Field equipment
must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net
or equipment framework at anytime! All fastenings must be checked to insure they are fully
tightened before and after each use of this product. Equipment not in use must be disassembled
and properly stored in a safe, secure area. Assembled field equipment should not be left
unattended. Remove nets when equipment is not in use. Do not use this equipment during the
threat of high winds. Field equipment must be checked for safety before and after each use. All
warning and safety labels included with this product must be visible at all times. Any modifications
to this or any Kwik Goal product will void any and all warranties.
Back Board (2)
(Part# WZ1176-02)
