K60x User Guide
40
K60x User Guide
To make a reset cable from an unused Ethernet cable:
1.
Cut an easy to manage length, typically 12” or less, from an Ethernet cable, leaving
the RJ45 plug on one end.
2.
Remove the outer jacket from the cut end of the cable and separate the wires for
pin 1 and 2. (For straight-through T568B pinout wiring this is the orange/white and
orange pair.)
3.
Short out the pin 1 and pin 2 pair of wires by stripping the insulation and twisting
the conductors together. Leave the rest of the wires open.
4.
Break off the locking tab (clip) from the plug, but leave the plug intact. This makes it
easier to insert and remove the plug from the unit. The reset cable is ready to use.
