K60x User Guide
28
K60x User Guide
Tip:
Since the ports on the unit are weatherproof, a standard RJ45 Ethernet plug will
lock into place and be difficult to remove. One option is to remove the locking
tab from a standard RJ45 plug. Or, use an Ethernet cable equipped with the
weatherproof Harting push-pull plug (IP67 rating) to be used for outdoor
installation.
•
Log in with the unit’s password to change settings or access sensitive information.
6.1
Open the WebUI and log in
The K60x WebUI is a single page with status information and settings on multiple tabs. To
directly access the K60x WebUI:
1.
Supply power to the K60x and connect it to your Internet-enabled computer with a
Cat5 or higher Ethernet cable, as described in the previous section.
2.
Open a browser on y
our computer and browse to the unit’s IPv4 IP address via
https. For example,
https://169.254.6.137
. (Your unit’s specific IP address will be
different from the example, but will follow the pattern: 169.254.#.#. See
.) If issued a security warning, click the
Advanced
button and
Proceed
to the site.
Note:
For some browsers, you can use the unit name, (KB-XX-XX-XX) instead of the IP
address. For example,
https://KB-C6-03-06
.
