TracVision M5/M7 User’s Guide
76
Appendix A - Advanced Settings and Functions
Use the flowchart in Figure A-2 to modify the serial output settings, or
if you wish to restore the original output settings.
Figure A-2 Serial Output Settings
<Default Display>
Menu
Setup data outputs?
Enter Next
Return
Set sine-cos levels?
Yes
Next
Return
Set serial outputs?
Yes
Next
Return
Setup display type?
Enter
Next Return
Select serial port 1
Yes
Next
Cancel
Select Next to toggle
ports as required, then
select Yes.
Resetting outputs?
Yes
No
Select - or +
as required,
then select
Enter.
Serial port 1 config
Output Data:NMEA
Outputs erasing
Please Wait
Set speed:
10 Hz
-
Enter
+
Select output type
NMEA
KVH
Cetrek
Select output BWC?
Yes
Next
Cancel
Select Next to toggle
output types (BWC,
GGA, GLL, HDG, HDM,
HDT, VTG, and XTE) as
required, then select
Yes.
Setting
selection
Please wait
Select output BWC?
Yes
Next
Cancel
Select Cancel to accept the
selection.
NMEA Configuration
Cetrek data is:
Mag
Enter
True
Select Mag or True, then
select Enter. This displays
only if a valid GPS
connection is detected.
Cetrek Configuration
Then select “Yes” to
confirm your selection.
