KVH Industries TracVision C3, Owner'S Manual

Page: 28 / 82

2-10
A Guide to TracVision C3
2.3.1 Connecting the Antenna Data/Power
Cable
1. Connect one end of the antenna data/power cable
to the antenna’s data/power connector and lock in
place (see Figure 2-13).
2. Route the other end of the data/power cable down
through the cable access hole in the deck and out
through the switchplate panel cutout.
3. Connect the data/power cable to the switchplate’s
data/power connector and lock in place (see
Figure 2-14).
Data/Power
Figure 2-14
Switchplate Data/Power Connector
Figure 2-13
Antenna Data/Power Connector
Data/Power