KVH Industries TracPhone F55, Installation Manual

Page: 72 / 157

Chapter 9: Setting Up the System
50 Service User Menu
9.3.4 PIN Codes
Overview
Access to some of the terminal functionality is restricted by a PIN code. There
are two kinds of PIN codes, a Super User and a
Service User PIN. Common for
both PIN types is that the length must be between 4 and 8 digits long and
contains digits between 0 and 9.
If the Super User/Service User PIN code is entered incorrectly 5 times, the PIN
becomes blocked.
A blocked Super User PIN, can be unblocked with a PUK code (Normally
known to the Super User) or by a Service User.
The default factory Service User PIN code is ‘12345678’ .
A blocked Service User PIN can be unblocked with a PUK code or by a Service
User.
The Service User PUK code is normally known only to Thrane & Thrane A/S
and/or the supplier.
Changing the Super User Pin
1. From the main menu select Service User by pressing or and
press .
2. Type the Service User PIN code and press to enter the Service user
menu.
3. From the Service User menu select PIN Codes by pressing or
and press . Select SU PIN by pressing or and press .
4. Press to type new PIN.
5. Enter new PIN and press . Retype PIN and press .
OK
OK
OK OK
OK
OK OK