KVH Industries TracPhone F55, Installation Manual

Page: 10 / 157

TracPhone F55/F77 Installation Notes
9 9 34-0004 Rev. C
2. Remove the antenna unit from its shipping carton.
3. At the mounting site, lay out the four mounting bolt holes as shown
below. Also, lay out a cable access hole large enough to
accommodate the antenna cable.
4. Before drilling the holes in the deck or mounting platform, you need
to verify that the antenna will be aligned properly when it is
mounted. Position the antenna unit in place over the hole locations
and ensure the baseplate connector is facing the stern. Set the
antenna unit aside.
FWD
4 x 0.5"
(4 x 13 mm)
12"
(305 mm)
6"
(152 mm)
12"
(305 mm)
6"
(152 mm)
Baseplate Footprint
17"
( 432 mm)
Antenna Baseplate Mounting Hole Pattern, Top View
Baseplate
Connector