Kvaser BlackBird Getting Started Guide
20(39)
Kvaser AB, Mölndal, Sweden
— www.kvaser.com
The network accessibility can be set to any one of the following three modes:
1. Public. The device is visible to and usable by anyone on the network, and no
password is required to connect.
2. Protected. The device is visible in the network setup program, but it cannot be used
from a PC without supplying the network connection password.
3. Private. The device is not visible in the network setup program. Anyone who wants to
use it must know its network address and must supply the network connection
password.
5.7 Save the configuration
The device is now configured. Save the parameters to the device by clicking the Apply button.
The device will restart. After 5 - 10 seconds you should see the device trying to connect to the
WLAN in the status bar.
5.8 Verifying the WLAN connection
When connecting to the PC in ad-hoc mode, make sure that the PC is still connected (i.e. a
timeout has not caused the PC to disconnect from the network).
Return to the Status tab again:
The connection status should become Connected.
