Front View
1.
Laser aperture window.
To clean the laser aperture window from inside or to swap the aperture
window for a different type of aperture (i.e. DiscoScan lens attachment bracket), remove the four
socket bolts that hold the laser aperture window in place and gently remove it.
2.
Aperture masking plate.
This metal masking plate can be moved up and down when two locking
bolts are loosened. This useful safety feature gives you an option to limit the bottom of the laser
output area if necessary (for example to avoid audience scanning). If it is required to limit the
output from the top, the masking plate can also be attached to the top of the aperture.
3.
Attachment bracket.
The attachment bracket spins 360 degrees around the laser body whilst it
can be locked in desired position by four small locking handles on sides. Due to a sophisticated
locking mechanism there’s no need to use excessive force when locking the system in position.
4.
Laser emission indicator.
When this indicator is lit up the laser system is ready to emit the laser
radiation as soon as it receives instructions from control software.
5.
Optical compartment cover bolts.
To access the optical compartment of the laser system undo
14 button hex bolts and carefully remove the cover.
Kvant spol. s.r.o.
Spectrum series - v16816
Page 21 of 38
