8
i
28
EN
2.3
installation of the system
!
The manufacturer is not liable for damages
or a injury caused by improper installation
of the system. The installation should
be carried by a qualified installer who
should follow the Laser Safety Regulations
of respective country.
Please follow these rules during the installation:
1. Do not connect the device to power supply during
the installation. Only connect the device to power
after the installation and mounting have been
completed.
2. Mount the system only to mounting point that is strong,
secure and away from places where nonauthorised
person could get an access to.
3. Always make sure the system is properly tightened
down, and that it cannot get loose and move as a result
of sound vibrations, cables pulled on, or similar
external disturbances.
4. Always attach a safety chain or cable between the
projector and its structure (such as truss).
5. Ensure that all the cables have enough length just
incase they get caught.
6. Ensure that the system is placed at least 20cm away
from walls or any other objects including drapes etc.
7. Ensure that the system is placed well away from any
heat sources including spotlights, moving heads,
radiators, etc. Make sure there is a sufficient air-flow
around the laser system.
8. It is essential that the fan openings are never covered
during the laser operation.
9. Always follow the Laser Safety Regulations
of respective country where the laser is being used.