Kval ON-HD, Operation Manual, Page: 37 / 72

Staging Area Controls
KVAL ON-HD Operation Manual
2-7
Staging Area Controls
The Lift controls are located at the staging area.
To Enter Staging Area (Request Access):
To Exit the Staging Area
1.
The blue light will
blink
and the lift
will move a door over the rollers.
2.
After door is over rollers, enter the
Staging Area
Blinking
Push
3.
After task is completed, exit the door
staging area and PULL OUT the
Request Access Button
4.
Press the
Reset Light Curtain Button
to continue with the process. The
Request Access Button
will turn to a
steady blue color.
Emergency Stop:
Press the Emergency button to stop machine.
Will maintain clamp and lift. To restart machine, see “To
Resume Normal Operation after an E-Stop” on page 2-5.
Pause/Resume Lift:
Press to pause lift. Pull-out the button to Resume
Operation. The action in process will be paused and maintained.
Note: If entering the staging area use the Request Access buttons
located on the Staging area frames.
Push
Pull Out