___________________________________________________________________________________________
CH1112/CH1124/CH2112/CH2124
3
SECTION 3 : NOTICES
3.1
Avoid to place the charger in the environment
such as high temperature, humidity, acid & alkali,
Prevent from insolation, drench and caustic.
3.2
AC input voltage should fit the charger type. We
suggest to install a protection device (such as
MCCB) inter AC power and charger.
3.3
Never depart the charger.
3.4
Never change internal wiring of the charger.
3.5
Never adjust internal VRs of the PCB
intentionally.
3.6
Routine-check of output voltage is necessary.
3.7
Terminals of the charger and polarities of the
battery should be connected correctly, red to “+”,
black to “
”.
Warning :
Never short “+” (red terminal) and “
”
(black terminal) polarities.
3.8
Please operate the charger under the max.
maximum capacities.
3.9
Beside charge battery, please do not use charger
for other purpose.
3.10 When install the output connect wires, please
references the figure below.
Correct
Incorrect
Incorrect
