ProLaser III Operator's Manual
Page
29
Stopwatch Enter Mode
The ENTER selection is used to enter the unit of
measure to be used in the stopwatch mode (Option 3).
The ENTER screen is depicted below-
Use either of the blue arrow switches to choose the
unit of measure to be used in the stopwatch mode. Either
selection will summon a distance entry screen that
appears below:
Using the blue arrow switches, enter the distance the
target vehicle will be traveling during the measurement.
The minimum range that can be used is 300 feet.
Depress ENTER to confirm your selection. Once the
ENTER switch is pushed, the Audio On/Off screen will
appear. The screen looks like:
Enter Distance
(FEET) 1320
Audio
(ON) OFF
STPW Distance
(FEET) YARDS
