background image

TM

AUTO CHARGE 1

INSTALLA TION GUIDE & MANUAL

Visit:  www.evpeurope.com

Call:  +44 (0) 1926 419441

E-mail:  [email protected]

EVP Ltd, Unit 4, Benford Court, Lower Cape, Warwick, CV34 5DA

Company Registration Number: 9121263 

VAT number: 196484653

INTRODUCTION

The Model 091-31-12-115/230 automatic battery charger is a 

completely automatic battery charger designed to charge 

small lead-acid batteries at a rate of 1 ampere or less.

The unit is current limited to 1 ampere and provides a low ripple 

charging current.

The charger will charge the batteries whenever their float 

voltage drops. When the batteries are fully charged, all charging 

stops. Any load applied to the battery when the charger is 

connected and energized will automatically be supplied by the 

charger up to the maximum 1 ampere capacity.

The Model 091-31-12-115/230 is factory set for 115VAC or 

230VAC primary power operation at time of order. Please 

verify that installation primary power and 091-31-12-115/230 

input power requirements are correct prior to installation and 

operation.

SPECIFICATIONS

• 

Input:

 115VAC or /- 10 volts, 50/60 Hertz. 

Factory Set

• 

Output:

 DC, 13.25 Volts, Ripple: less than 100 mv Current: 

0 to 1 amp depending on battery state of charge

•  Input Wiring:

 #18 AWG: Blue and Brown, Refer to Figure 1.

•  Output Wiring:

 Via P1/J1: Refer to Figure 1

•  Power Indicator:

 none

•  Weight:

 19 ounces

WARRANTY

All products of Kussmaul Electronics Company Inc. are 

warranted to be free of defects of material or workmanship. 

Liability is limited to repairing or replacing at our factory, 

without charge, any material or defects which become 

apparent in normal use within 3 years from the date the 

equipment was shipped.

Kussmaul Electronics Company, Inc. shall have no liability for 

damages of any kind to associated equipment arising from the 

installation and /or use of the Kussmaul Electronics Company, 

Inc. products. The purchaser, by the acceptance of the 

equipment, assumes all liability for any damages which may 

result from its installation, use or misuse, by the purchaser, his 

or its employees others.

MODEL(S): 091-31-12-115 / 091-31-12-230

OUTPUT: 13.25 VOLTS DC, 1 AMPERE.

INPUT: 115VAC, 50/60HZ or 230VAC, 50/60HZ

Reviews: