INTRODUCTION
The EURO CHARGER II, Model 091-117-xx is a compact , completely automatic dual chan-
nel battery charger designed specifically for the fire service and emergency vehicles. The
voltage of each battery is individually controlled so that each battery is charged only as much
as required. Once the batteries are fully charged, current stops flowing to guard against over-
charging and water boil-off. Of rugged construction, the charger is made to withstand the
shock and vibration encountered in vehicle mounted equipment. Utilizing components which
meet international safety requirements makes this charger ideal for worldwide applications.
BATTERY CHARGER FEATURES
Completely automatic operation, charges battery on demand
Input voltage, switch selectable, 115 volt or 230 volts
Output voltage regulated, eliminates overcharging battery
Output, current limited to protect charger from overloading
Optional charge indicators
INSTALLATION
The EURO CHARGER II automatic battery charger should be installed in an area with
adequate ventilation.
Mount the charger using the four holes provided.
Connect the wiring from the batteries to the output terminal strip
Double check battery wiring. Verify that the battery voltage appears at charger output
terminals.
Set the voltage selector to either the 115 volt or 230 volt position to match the input source
available.
Connect the input power to the input power terminal strip and energize charger.
Verify that power indicator is illuminated and charger is charging.
