6.4.5 Installing the stabilisation bar
Allen key (3 mm) / Socket spanner (8 mm) / Phillips screwdriver (2)
■■□
With a back height RH405 or larger it is possible to install a stabilisation bar to increase the rigidity of the backrest handles.
1.
Remove backrest cover
A
, push handles
B
and the 10
cm backrest band (or end band, if no push handles are
assembled).
2.
Install a 5 cm backrest band
C
or end band with the
screws
L
to the push handles
B
.
3.
Install the push handles
B
with bolts and nuts
K
.
4.
Attach the clamps
D
together with the right-hand socket
F
and the left-hand socket
H
with the screws
G
below
the backrest band
C
to the push handles
B
.
5.
Press pin
E
and slide the stabilisation bar
J
into the
right-hand socket
F
then swing the stabilisation bar
upwards, press pin
I
and click the stabilisation bar into
the left-hand socket
H
.
G
= 4 Nm
K
= 7 Nm
L
= 4 Nm
1659360-B
25
Summary of Contents for CHAMPION
Page 11: ...Instructions 6 Instructions 1659360 B 11 ...
Page 42: ...Notes ...
Page 43: ...Notes ...
