Küschall® Champion
6.4.3 Backrest angle (BA)
Adjusting the backrest angle
Allen key (4 mm) / Wrench (10 mm)
■■□
1.
Remove the lower bolt and nut
A
from the side
supporter
B
and move the backrest
C
to the required
position. The spacer
D
remains fixed in the latch bolt
E
.
2.
Insert bolt and nut
A
into the closest hole and tighten
it again.
3.
Carry out the same setting on both sides.
A
= 13 Nm
Function control:
The backrest must fold easily and the ratchet bolt must sit tightly against the side supporter.
6.4.4 Push handles / telescopic tubes
Replacing the push handles / telescopic tubes
Allen key (4 mm) / Wrench (10 mm) / Phillips screwdriver (2 mm)
■■□
1.
Remove the backrest cover
A
.
2.
Remove the screws
C
holding the uppermost backrest
band
B
(or standard backrest cover) to the push handles
E
(or telescopic tubes).
3.
Slide the backrest straps
D
(or standard backrest cover)
either up or down to locate the fixing bolt
F
.
4.
Remove bolts and nuts on both sides
F
.
5.
Remove push handles
E
(or telescopic tubes).
6.
Slide new push handle through backrest band
B
and fix
it on the backrest with bolt
F
.
7.
Fix the upmost backrest band
B
(or standard backrest
cover) with screws
C
.
8.
Carry out the same setting on both sides.
9.
Reposition the backrest cover correctly.
C
= 4 Nm
F
= 7 Nm
22
1659360-B
Summary of Contents for CHAMPION
Page 11: ...Instructions 6 Instructions 1659360 B 11 ...
Page 42: ...Notes ...
Page 43: ...Notes ...