CLR
mem
08
®
VOL
®
09
VOLUME CALCULATION :
W
L
H
READ
w
w
"L" will blink showing which measurement you will be taking.
Press to take "L" measurement that is displayed on upper
portion of screen.
w
"W" will blink showing the next measurement to take. Press
to take "W" measurement that is displayed on upper
portion of screen.
w
"H" will blink showing the next measurement to take. Press
to take "H" measurement that is displayed on upper
portion of screen.
w
The Volume is automatically displayed on the lower portion of
the screen.
w
To start another Volume mode, press then key.
w
OR to another mode, press key.
w
OR to store, press (M1 M2 M3 blink with the result displayed
on the screen), press desired memory location i.e.
A short beep with M2 and result displayed on the screen, press
key to next measurement.
Press to enter Volume mode calculation of a room volume.
VOL
READ
READ
VOL
ESC
ESC
STORE
M2
ESC
w
w
Press to clear the store mode.
w
Follow the above procedure to continue store.
Press , M1 M2 M3 blink with the result displayed on the
screen, press desired memory location such as , a short
beep with M3 and the result display on the screen.
STORE :
STORE
M3
ESC
w
New memory automatically cleared the previous memory.
Note :
w
w
To store result into memory, press / / .
w
To recall memory press / / .
w
To clear memory, press desired memory location such as
then press .
w
Press to skip next mode.
Press , M1 M2 M3 blink on the screen
MEMORY :
STORE
ESC
M2
M2
M1
M3
M1
M3
M1
w
w
Memory will be erased when the main switch is switched to
OFF/LIGHT.
New memory automatically cleared the previous memory.
Note :
w
To clear desired memory location, i.e. , press then .
w
Press to skip next mode.
CLEAR MEMORY :
CLR
mem
M2
CLR
mem
M2
ESC
w
Press to start / skip next mode.
w
Press to clear the result on the screen.
ESCAPE :
ESC
ESC
ESC
