background image

M2

STORE

®

07

ESC

AREA

06

®

ü

90º

90º

90º

û

Hold the unit perpendicular and
straight to the target on the wall
and press the             key.

READ

û

ü

10cm(min.)

READ

CLR

ESC

STORE

VOL

AREA

Ft

m

mem

M1

M2

M3

Fm

Bm

ADD

2M (max.)

ü

Target min. 0.3M

READ

CLR

ESC

STORE

VOL

AREA

Ft

m

mem

M1

M2

M3

Fm

Bm

ADD

5M (max.)

12"

TABLE

ü

TABLE

12.  OPERATIONS :

w

 

w

 

Select       for measuring by feet  

0' 0"

 or Meter  

0.00

  of Length,

M

   Area and Volume.

Select  the  unit  by  pressing  the       for front        or base       

   measuring point.

SELECTIONS :

Fm
Bm

Ft
m

Fm
Bm

Ft
m

w

 

Pressing       or       key  again  will  toggle  back  and  forth  the 

   setting.

Note :

Fm
Bm

Ft
m

w

 

w

 

For instant dynamic feedback reading, press and hold          key

   to get measured distance displayed while the unit is moving.

w

 

Each measurement erases the previous one.

w

 

Result of measuring distance display on top of LCD screen.

w

 

Unit automatically turns OFF after 1 minute of inactivity.

w

 

Press and hold the           key for 3 seconds for re-start.

Point to  the  target  with the unit perpendicular to the  wall  and 

   get measure distance by pressing           .

READ :

READ

READ

READ

READ

ADD

w

 

w

 

Press        to enter the addition mode. A "+" icon will appear  on

   LCD screen.

w

 

Press            again for second measurement.

w

 

The sum is shown in step of LCD screen.

w

 

Follow the above procedure for continuous adding.

Press            for measurement.

ADDITION :

ADD

READ

READ

READ

w

 

w

 

"L" will blink showing which measurement you will be taking. 

   Press           to take "L" measurement that is displayed on upper 
   portion screen.

w

 

After, "W" will blink showing the next measurement to take. 

   Press            to take "W" measurement that is displayed on 
   upper portion.

w

 

The Area is automatically displayed on the lower portion of the

   screen.

w

 

To start another Area mode, press       then        key.

w

 

OR to another mode, press      key.

w

 

OR to store, press      (M1 M2 M3 blink with the result displayed 

   on the screen), press desired memory location i.e.
   A short beep with M1 and result displayed on the screen, press
        key to next measurement. 

Press        to enter Area mode for calculation of a room area.

AREA CALCULATION :

W

L

AREA

READ

AREA

ESC

ESC

Summary of Contents for KM 972M








Reviews: