10
Connect tip of the test leads to the point where the
conduction condition needed.
If the resistance is under 100
W,
the beeper will sound
continuously.
6-5 Continuity Test With Buzzer :
Switch the main function to
W
range.
Connect red test lead to “+” terminal and black one to
the “COM” terminal.
6-6 Resistance Measurement
Switch the main function to
W
range.
Connect red test lead to “+” terminal and black one to
the “COM” terminal.
Connect tip of the test leads to the point where the
value of the resistance is needed.
Read the result from the LCD panel.
11
7. BATTERY CHANGING
When the battery voltage drop below proper operation
range the symbol will appear on the LCD display and
the battery needs to be changed.
Before changing the battery, switch the main dial to
“OFF” and disconnect test leads.
Open the back cover by a screwdriver.
Replace the old batteries with two new 1.5V (AAA
size) battery.
Close the back cover and fasten the screw.
