6
5. BUTTON INSTRUCTION
5-1. HOLD Function
It is possible to freeze the value displayed by pressing
on the
“HOLD”
button.
Press the “HOLD” button again to exit the Hold mode.
5-2. MAX/MIN Function
When the “MAX/MIN” button is pressed, the meter
enter MAX/MIN mode.
Press the button, to read MAX, MIN sequence. Press
the button for 1 sec. or more to exit the MAX/MIN
mode.
When you turn the rotary switch on the Continuity
Test.
Press the
“MAX/MIN”
button to select Resistance
measurement,
Press the
“MAX/MIN”
button again to select
continuity test with buzzer.
5-3. ZERO Function
Press “ZERO” button to enter the Zero mode, ZERO
Annunciate will appear and Zero the display. The
reading is stored as reference value for subsequent
measurement.
5-4 BACKLIGHT Function
When the “ ” button is pressed, the backlight will be
turned on.
To disable the function, the button is pressed again.
The backlight will be automatically turned off about
30 seconds after it turned on.
7
6. MEASURING INSTRUCTION
6-1 ACA Measurement : With the clamp disconnected
from any conductor, switch the function selector to
A range.
~
Open the clamp by pressing the jaw-opening handle
and insert the Cable to be measured into the jaw.
Close the clamp and get the reading from the LCD
panel.
Note :
Before this measurement, disconnect any test lead
with the meter for safety.
In some cases where reading is difficult, press the
HOLD button and read the result later.
