!
9
Switch the main function selector to V range.
~
Connect red test lead to “+” terminal and black one to
the “COM” terminal.
Measure the voltage by touch the test lead tips to the
test circuit where the value of voltage is needed.
Read the result from the LCD panel.
6-4 DCV Measurement :
Switch the main function selector to V range.
~
Connect red test lead to “+” terminal and black one to
the “COM” terminal.
Measure the voltage by touch the test lead tips to the
test circuit where the value of voltage is needed.
Read the result from the LCD panel.
8
6.2 DCA Measurement :
With the clamp disconnected from any conductor,
switch the function selector to A range.
—
---
Press “ZERO” button to enter the zero reading.
Open the clam by pressing the jaw-opening handle
and insert the cable to be
measured into the jaw. close the clamp and get the
reading from the LCD panel.
Note : Before this measurement, disconnect any test
lead from the meter for safety.
In some cases where reading is difficult, press the
“HOLD”
button and read the result later.
6-3 ACV Measurement :
WARNING !
!
Maximum Input Voltage is 300V AC/DC. Do not attempt
to Take any voltage measurement that may exceed this
maximum to avoid Electrical shock hazard and/or damage
to this instrument.
