4-10
Setup Mode
Adjusting The Volume And Pan Of Zones
3.
On the PAN-VOL page, use the
Chan/Layer
buttons
to the left of the display to select zone 2. You
can view the number of the selected zone in the top right corner of screen (see below.)
4.
Use the cursor to select the
EntryVolume
parameter. The volume for this zone is already at its
maximum value
127.
Let’s use the alpha wheel to turn this parameter down to
90
(see below.) Now
the zone will play the piano program
8 Grand “Evans“
at a lower volume than zone 1.
Next, let’s adjust the Pan (left/right speaker position) of zone 2:
5.
On the PAN-VOL page of zone 2, use the cursor to select the
EntryPan
parameter. Use the alpha
wheel to turn this parameter to
127
(see below.) Now the zone will play the piano program
from
only the right speaker
. (For the
EntryPan
parameter, a value of 64 plays the program at equal
volume from left and right speakers. A value of
0
plays the program from only the left speaker, and
a value of
127
plays the program from only the right speaker. Values in between make the sound
appear to come from a position between the left and right speakers.)
Use the same methods to adjust volume and pan for any zone. See
The Setup Editor
above for
details on saving these changes when you exit the Setup Editor.
