Setup Mode
Using Setup Mode To Play Layers Of Instruments
4-7
Using Setup Mode To Play Layers Of Instruments
In a setup you can set zone key ranges that overlap. This creates layers of instrument programs
that are played from the same key range. As an example, let’s use the
setup
38 Jazz Bass/Piano,
a
split setup of bass and piano, and add a layer of strings to the piano section:
1.
Press the
Exit
button until you reach the ProgramMode page. Next, press the
Setup mode
button,
located with the mode buttons to the left of the display. This will bring you to the Setup mode
MAIN page.
2.
Use the plus/minus buttons or alpha wheel to select the setup
38 Jazz Bass/Piano
or use the
alphanumeric pad to enter
38
and press
Enter
(see below.)
3.
With the setup
38 Jazz Bass/Piano
selected, press the
Edit
button on the front panel. This will
bring you to the CH/PROG
page of the setup editor (see below.)
4.
On the CH/PROG page use the
Chan/Layer
buttons to the left of the display to select zone 2.
You can view the number of the selected zone in the top right corner of screen. In the
Program
field you can view the instrument Program for the current zone. We can see that the program for
zone 2 of this setup is the piano program
8 Grand “Evans
”
(see below.)
