Program Edit Mode
All Parameters Page
3-8
Control Column
Use the Control column to assign an SP6 control or MIDI CC number for the Parameter in
that row. Use the PREVIOUS/NEXT buttons to navigate to the Control column.
To assign an SP6 control, select the Control column for the desired Parameter, then hold
the ENTER button and move the desired SP6 control (knob, VARIATION button,
MODULATION WHEEL, or pedal).
When the Control column is selected, you can also select a MIDI CC number by using
the ALPHA WHEEL, or use the keypad function of the CATEGORY buttons to type a
numeric value followed by pressing the ENTER button. MIDI CC numbers used by SP6
controls will show the SP6 control name instead of the MIDI CC number. See
for a list of MIDI CC numbers used by SP6 controls.
Val Column
The Val column shows the current value (0-127) of each parameter. The values that are
shown when the Program is saved will be recalled each time the Program is selected. Use the
PREVIOUS/NEXT buttons to navigate to the Val column.
To set a value, select the Val column for the desired Parameter, then change the value by
using the ALPHA WHEEL, or use the keypad function of the CATEGORY buttons to type
a numeric value followed by pressing the ENTER button. If an SP6 control or MIDI CC
number is assigned to a parameter, moving the assigned SP6 control or sending a MIDI CC
from an external MIDI device will set the value.
A value of “None” can be selected by using the ALPHA WHEEL to scroll below 0. When
a Parameter is set to a value of “None”, the parameter will not be set to a default value
when the Program is selected. This allows the Parameter to use the last value it had in the
previously selected Program (if the previously selected Program had the same parameter).
KB3 Organ FX Chain Parameters
For programs containing KB3 Organ FX Chain Parameters, different Val settings can activate
different effects. See below for each parameter and the available Val settings.
Chorus/Vibrato Select
Values 0-63 = Vibrato, 64-127 = Chorus.
Chorus/Vibrato Depth
Values 0-42 = Depth 1, 43-85 = Depth 2, 86-127 = Depth 3. Depth 1 has the least amount
of effect applied, Depth 3 has the most.
Note:
In factory KB3 Organ programs, the FX2 knob controls dry/wet for an additional
