manualshive.com logo in svg

Kurzweil SP6, Musician'S Manual

Share
Download
Kurzweil SP6 Musician'S Manual Download Page 26

Program Mode

Program Demo

2-2

Select a Program by ID Number

Press and turn on the KEYPAD button. The keypad button allows you to use the numbers 

labeled on the CATEGORY buttons to select Programs or Multis by ID number. Type an ID 

number followed by pressing the ENTER button to select the associated Program.

Select a Category Default Program

Each category has a Category Default Program (the Program which is selected when each 

CATEGORY button is pressed). By default the Category Default Program is set to the first 

Program of each category. To set a different Category Default Program, select a Program, 

make sure the KEYPAD button is off, then press and hold the currently lit CATEGORY 

button.

Program Demo

To hear a Program Demo song for the current Program, press the KEYPAD and ENTER 

buttons simultaneously. 

The LCD

In Program Mode, the top line of the LCD shows the current Mode, MIDI transposition, 

and MIDI Channel. 
The Program ID number and name are displayed in the center of the LCD. 
When a controller is moved, the controller assignment and value is briefly displayed below 

the Program ID and name.
The values of the KNOBS currently selected by the SHIFT button are displayed at the 

bottom of the LCD.

Summary of Contents for SP6


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands