PC88 Made Easy
53
4. Press the Copy button. Press the >> button, then Enter.
You should be aware that this will only copy the parameters found within the
Arpeggiator menu. If you have any controllers assigned to function such as Arp Latch or
Arp Switch, they will not be copied.
To copy all the Effects parameters from one effects processor to the other or from one
Setup to another:
If you have j ust edited the Internal effects and want the same settings for the VGM
effects (or vice versa), you can copy and paste those settings.
1. Call up the Setup which has the effects data that you want to copy. Press the Effects
button. If you want to copy the Internal effects, go to step 2. If you want to copy the
VGM effects, press the >> button 5 times to get to one of the VGM effects parameters.
2. Press Copy, Enter.
3a. Press the << or >> buttons until the display changes from one of the Internal effects
parameters to one of the VGM effects parameters (or vice versa). Go to Step 4.
3b. You can also paste the effects into a different Setup. Press the MIDI Setups button.
Select the Setup that you want to paste into. Press the Effects button. If you want to
paste into the Internal effects, go to step 4. If you want to paste into the VGM effects,
press the >> button 5 times to get to one of the VGM effects parameters.
4. Press the Copy button. Press the >> button, then Enter.
Special characters for naming Setups
Following is a list of all of characters available for Setup names, in the order in which
they are found. The easiest way to get to them is to press one of the alphanumeric
buttons to select a character close to the one you want, then scroll to it with the alpha
wheel. HereÕs the whole list:
! Ò # $ % & Ô ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9
: ; < = > ? @ A through Z
[ \ ] ^ _ Ô a through z (space).
We hope this tutorial has been helpful and you now have a much better understanding
of how to program the PC88. If you have any questions or comments, please send email
to [email protected].
