PC88 Made Easy
To copy all the parameters from one zone to a zone in a different Setup:
1. Call up the Setup which has the zone that you want to copy. If you have already
entered the Setup Editor, make sure you are NOT on one of the parameters within the
Controller menu.
2. Press Copy, then press the zone button for the zone you want to copy. Then press
Enter.
3. Press the MIDI Setups button. Select the Setup that you want to paste into.
4. Press the Copy button. Press the >> button, then press the Zone button for the zone
you want to paste into. Then press Enter.
To copy all the controller parameters from one controller to another:
1. Call up the Setup which has the controller data that you want to copy. Hold the
Controllers button and move the controller that you want to copy, to bring up the first
parameter for that particular controller. If you are not on the zone which has the
controller parameters you want to copy, press the zone button for the correct zone.
2. Press Copy, Enter.
3a. If you want to copy the data to the same controller but in a different zone, press the
appropriate Zone button, then press the >> button to get to the Paste parameter, then
Enter.
3b. If you want to copy the data to a different controller, hold the Controllers button
and move the new controller. You can also choose a different zone at this point by
pressing the appropriate zone button. (For example, you might want to copy all the
Zone 1, Slider A parameters to Zone 2, Slider B.) Press the Copy button, then the >>
button, then Enter.
3c. You can also copy the controller parameters into a different Setup. Press the MIDI
Setups button and select the Setup you want to paste into. Hold the controllers button
and move the appropriate controller. Press the Zone button for the appropriate Zone.
Press the Copy button, then the >> button, then Enter.
It is important to keep in mind that you can only copy and paste into similar controllers
- the parameters for a switch controller can only go to another switch controller, and
those for a continuous controller can only go to another continuous controller.
To copy all the Arpeggiator parameters from one Setup to another:
1. Call up the Setup which has the arpeggiator data that you want to copy. Press the
Arpeggiator button.
2. Press Copy, Enter.
3. Press the MIDI Setups button. Select the Setup that you want to paste into. Press the
Arpeggiator button.
