manualshive.com logo in svg

Kurzweil Forte SE, Musician'S Manual

Share
Download
Kurzweil Forte SE Musician'S Manual Download Page 46

The Operating Modes

Program Mode

5-1

Chapter 5

The Operating Modes

This chapter will help familiarize you with the operating Modes of the Forte SE. 
Each of the five Modes (Program, Program Edit, Multi, Multi Edit, Global) has its own 

individual chapter. 
The four Functions (Split, Layer, Program Demo, and Song Demo) are described in this 

chapter in 

Functions on page 5-4

.

Program Mode

Program Mode is the default Mode for the Forte SE. 
In Program Mode, instrument sounds (Programs) can be selected and played. The sound of 

each Program can be modified by parameters that are assigned to the controllers (Sliders, 

Assignable Switch buttons, Zone buttons, Mod Wheel, Pitch Wheel, and Pedals). Modified 

Programs can be saved as User Programs by pressing the Save button.
To enter Program Mode from another Mode, press the Program Mode button.

For more detailed information on Program Mode, see 

Ch. 6 Program Mode

.

Summary of Contents for Forte SE























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands