Kurzweil Forte SE, Musician'S Manual

Page: 240 / 374

Multi Edit Mode
The Controller Destination List
11-22
Controller
Number
Controller
Destination
Description
90 MIDI 90 Default assignment for Assignable Switch 9
91–95 MIDI 91–95 MIDI Controllers 94–95
96 Data Inc Equivalent to pressing the Next Value button
97 Data Dec Equivalent to pressing the Previous Value button
98 NRegParL Non–Registered Parameter Least Significant Byte
99 NRegParM Non–Registered Parameter Most Significant Byte
100 RegParL Registered Parameter Least Significant Byte
101 RegParM Registered Parameter Most Significant Byte
102–119 MIDI 102–119 MIDI Controllers 102–119
120 Sound Off Stops all sound in the corresponding channel.
121 RstCtls Resets Controllers to defaults in the corresponding channel.
122 Local Reserved for use by MIDI specification
123 Notes Off Sends Note Off Message to all playing notes in the corresponding channel.
124 Poly Reserved for use by MIDI specification
125 Omni Reserved for use by MIDI specification
126 Mono On Reserved for use by MIDI specification
127 Mono Off Reserved for use by MIDI specification
128 Pitch Values above 64 and below 64 bend the pitch up and down, respectively.
129 PitchRev Values above 64 and below 64 bend the pitch down and up, respectively
130 PitchUp Values above 0 bend the pitch up
131 PitchDwn Values above 0 bend the pitch down
132 Pressure Default Destination for Pressure
133 Tempo Tempo
134 KeyNum
Triggers playback of notes by Key Number—e.g., C4 is 60. Send a velocity first with
Destination 135, KeyVel.
135 KeyVel Key Velocity
136 ProgInc Program Increment—increments current Program number.
137 ProgDec Program Decrement—decrements current Program number.
138 ProgGoto Go to Program—selects Program.
139 MultiInc Multi Increment—increments current Multi number.
140 MultiDec Multi Decrement—decrements current Multi number.
141 SetpGoto Go to Multi—selects Multi.
145 TransUp Transpose Up (ST)
146 TransDown Transpose Down (ST)
147 Arp Values 0-63 turn the arpeggiator Off, Values 64-127 turn the arpeggiator On
149 MuteZn
Mute Zone – Values above 64 will mute the zone that sends values to this
destination, values below or equal to 64 will unmute the zone.
150 ArpOrder
Arpeggiator PlayOrder, each range of values selects one of nine settings in order of
the parameter list: 0-14, 15-28, 29-42, 43-56, 57-70,71-84, 85-98, 99-112, 113-127.
(See
“PlayOrder” on page 7-63
)
151 ArpBeats
Values from 0-127 change the Arpeggiator Beats value (see
Beats on page 7-61
for
details).
152 ArpShift
The 88 Arpeggiator Shift steps are scaled over the 128 MIDI controller values,
so that 0 = 0 steps and 127 = 88 steps. (See
Shift (Shift Amount) on page 7-62
for
details).