Global Mode
AUD-IN (Audio Input Page)
12-23
Sysex ID
The SysEx ID parameter determines the ID number for the unit if you are using more than
one device with the same MIDI manufacturer ID number. You can set this parameter to any
number from 0 to 127.
Unless you have multiple Forte SE keyboards receiving Sysex messages from a single source,
you will not need to change the Sysex ID from the default setting of 0.
If you do have multiple Forte SEs receiving Sysex messages from a single source, make sure
each Forte SE has a different Sysex ID. This will allow you to direct Sysex messages to the
appropriate Forte SE by specifying which unit with the Sysex ID byte that’s included with
every Sysex message.
To have the unit respond to Sysex messages regardless of the Sysex ID, set Sysex ID to 127.
Recv MMC (Receive MIDI Machine Control)
When the User Type parameter on the Global Mode Main page is set to Advanced, the “Recv
MMC” parameter appears on the Global MIDI page. Use the Recv MMC parameter to
enable or disable receiving of MIDI Machine Control messages sent to the Forte SE’s MIDI
In or USB ports. When Recv MMC is set to Off, the Forte SE will ignore MMC messages.
When Recv MMC is set to On, the Forte SE’s Song Mode will respond to MMC messages
for Song Play and Song Stop. This allows you to use an external sequencer to start or stop the
currently selected song in Forte SE’s Song Mode, as well as set the bar/beat location of the
current song.
AUD-IN (Audio Input Page)
Press the AUD-IN soft button to access the Audio Input page. The Audio Input page allows
you to choose an effects chain to apply to the rear panel 1/8” (3.5mm) input signal, and
enable or disable the use of any existing FX Mods in the selected Chain.
