4 | Transport, installation, storage, disposal
Unpacking and installing the Rework system
3
5
3
2
1
4
Fig. 3:
The Rework system in its opened packaging, on a forklift
d) Do not remove the hoisting slings (3).
e) Remove the center support (4) and lay it aside.
f) Remove the foam packaging (2).
g) Take the accessories out of their cardboard box (1) and lay them aside.
h) Release the power cable from its fastener and place it on the bottom heating.
DANGER
Severe or fatal injury from falling load!
a) Transport work may only be performed by properly trained and qualified person-
nel!
b) Do not stand or walk below suspended loads!
c) Only use proper lifting equipment, suitable for the load!
Ersa GmbH
Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1
36 / 157
