EKI 607/807
17
Coordination of the two front or two back cooking zones
If the front left-hand cooking zone is operated with the power function, the power
of the front right-hand cooking zone is reduced to 600 watt. The front right-hand
cooking zone can then be operated at a maximum setting of
7
.
If the back left cooking zone is being operated with the power setting on, the
output of the back right cooking zone is reduced to 800 watts. This means
that operation of the back left cooking may not exceed cooking setting
8
.
If a higher setting is selected, the numbers of the cooking setting selected and
the setting currently in use are displayed alternately in the cooking setting
display, e.g.
9
and
7
(
9
and
8
).
The power function can be
switched off prematurely
by pressing the minus
key of the respective cooking zone.
Residual heat indicators
As long as the cooking zone is still hot
(heating of the glass ceramic only through
hot pot) an “
H
” will appear in the display
when the cooking zone has been switched
off.
The pot recognition
All cooking zones have a pot recognition function.
If no pan or a pot unsuitable for induction
is placed on the activated cooking zone, a
appears in the display. Then the
cooking zone switches off automatically
after 10 minutes.
The pot recognition is for your safety and saves energy as it immediately
deactivates the pot recognition if no pot is placed. After use, however, switch
off the cooking zone with the correspondent minus key and do not only use
the pot recognition, as an empty pot that has been placed on the cooking zone
can activate the cooking zone again and heat up the empty pot.
Other functions
■
If two or more sensor keys are pressed at the same time – e.g. when a
pan is mistakenly put onto a sensor key – no function is activated. The
appliance switches off automatically after 10 seconds.
Exceptions:
– Deactivation of the sensor-lock
– Switching off the cooking zones
■
If you continue to press a sensor key after having set the highest cooking
setting, the appliance switches off automatically after 10 seconds.
■
The appliance does not automatically switch on again after a power failure.
■
The hob is switched off if the electronics become overheated. All LED
displays flash and a cyclical signal sounds.
Switching the hob off (rapid cut-out)
– Touch the sensor key Off for about 2 seconds.
The LED display above the sensor goes off. All cooking zones are immediately
switched off.
Child-proof lock (sensor-lock)
Operating the sensor lock detains unauthorised persons from using the
appliance.
– If a cooker which is not in operation is switched on when the child-proof
lock is activated, it will not be possible to select a cooking setting on
any of the cooking zones.
– If the child-proof lock is activated while cooking the hobs cannot be
switched higher.
The power function cannot be switched on. It is possible to switch off
the hobs and to switch down to a lower cooking level.
Activating the lock:
– Touch the children's safety sensor button
for about 3 seconds.
The following three control lights flash on the control panel:
– ON button
– children's safety button
– Key to deactivate the child-proof lock (no fascia)
Attention:
Switching the hob off does not cancel the children's safety feature!
Cancelling the children’s safety feature:
– Simultaneously touch the ON key
and the child-proof lock
.
– Touch the key to deactivate the child-proof lock located under the LED
child-proof lock display within 5 seconds.
The control lights stop flashing. The hob is fully operable again.
