16
EKI 607/807
Use of the cooking zones
Please note the safety instructions!
The induction hob has four cooking zones. The display symbols on the control
panel indicate the position of the cooking zones on the hob.
While the hob is in use, each activation of a key is confirmed by an acoustic
signal.
Switch on the hob
Press the sensor-button (sensor stand-by switch) button for approx.
2 seconds.
The LED display above the sensor lights up.
The appliance is in operation (stand-by mode).
The four cooking zones can now be used.
In the setting displays of the four cooking zones the setting “
0
” appears.
The stand-by mode automatically switches itself off,
– if you do not press another sensor key during the following 10 seconds
and no cooking zone is in operation.
– if you do not press any other key again after you switch off the last
cooking zone in use.
The switching-off time for this is 10 seconds.
– if one or more keys are pressed for more than 10 seconds.
Switching the cooking zone on and off;
Changing the cooking setting
For each cooking zone you have nine cooking settings available.
By using the plus or minus keys the cooking zone is switched on and off and
the desired cooking level is selected.
The number of the cooking level will be indicated in the respective display.
– Brief activation of the keys changes the cooking setting by one unit.
– Prolonged touching increases or reduces the setting to the corresponding
stop.
As far as possible, start cooking at the highest setting and continue at a
smaller setting.
If you touch the plus key, the
cooking zone starts at cooking
setting “1”. The value of the
cooking setting can then be set.
If you touch the minus key, the
cooking zone starts at the
maximum setting (setting “
9
”).
The value of the cooking setting
can be changed.
Touch simultaneously the plus-
and minus keys to switch off the
cooking zone.
After the cooking zone has been switched off, the display changes after
3 seconds, with the hot display active, from “
0
” to “
H
”.
The power function
The front left and the back right cooking zones have a power function which
can be switched on to provide these cooking zones with a higher output
(3000 W and 2300 W respectively).
If the power function for the front left cooking zone is switched on, the front
right cooking zone only has a maximum of 600 W available. If the power func-
tion for the back right cooking zone is switched on, the back left cooking zone
only still has a maximum of 800 W available.
To activate the power function, the
plus sensor key is pressed again
after the cooking setting “
9
” has
been selected.
The highest cooking setting (set-
ting
9
) with additional power is ac-
tivated.
A “
P
” is indicated on the
respective display.
The power function is effective for a period of 10 minutes. Then the appliance
is switched back to the maximum cooking setting. The setting “
9
” appears
again on the respective display.
Renewed activation
of the plus-key after the automatic return activates the
power function for another 10 minutes.
If the pot is removed while the power function is active, the time is stopped.
If the pot is placed on the zone again before the pot detection time
(10 minutes) has elapsed, the power function continues to run for the
remaining period.
or
