26
EEH 6100.1
– Gently lift the door and pull the
hinges forward away from the door
opening.
Refitting the oven door
– Grasp the oven door at both sides
and slide the hinges into the open-
ings on the oven. The hinge will click
into place.
– Slowly open the oven door until it is
fully open.
– Swing the hinge locks back into
position.
– Close the oven door.
Removing and refitting
the side racks
Removing the side racks
– Undo the screws.
– Take out the racks.
Refitting the side racks
– Insert the side racks and screw into
place in front.
What to do if trouble occurs...
[
Repairs must be carried out by a qualified service engineer!
But there are some problems that you can fix yourself. You should first check
that you are using the oven correctly. Repairs during the guarantee period are
chargeable, if they are caused by user error or non-observance of the following
instructions.
Replacing the oven lamp
[
Caution: danger of electric shock! Disconnect the oven from the mains
before you open the oven lamp cover. Switch off or pull out the fuse!
[
Allow the appliance and the lamp to cool before changing the lamp. If
the oven has been used recently, the lamp will be hot!
Type: 25 W, 230/240 V, fitting: E14
Important:
bulbs must be heat-resistant up to 300 °C!
These lamps are available from KÜPPERSBUSCH Customer service or from
your dealer.
Changing the light bulb:
– Unscrew the shelf rack.
Fault
Cause
Remedy
Heat indicator of a
cooking zone does not
work.
Blown lamp.
Call Customer service.
[
Risk of burning, as
there is no temperature
warning.
Not possible to switch
off hob or oven.
Faulty electronic component. Switch off at the mains; call
Customer service.
Oven and cooking
zones do not heat up.
Blown fuse.
Check and replace fuse.
Cooking zone does not
heat up.
Cooking zone control not
switched on.
Switch on control.
Control or cooking zone
defective.
Call Customer service.
Inner circuit of a dual-circuit
cooking zone defective.
[
Under no
circumstances
continue to use the
outer circuit which is
still working! Call
Customer service.
Oven does not heat up. Mode selector and/or oven
temperature control has not
been switched on.
Set mode selector and tem-
perature control as required.
Oven light no longer
works.
Blown lamp.
Replace the oven lamp.
Oven door glass
cracked.
Switch off the appliance; call
Customer service.
Door seal damaged.
Fit a new seal.
Fruit juice or egg white
stains on enamel parts.
Moist cake or meat juices.
Harmless changes in the
enamel, cannot be remedied.
