Kuppersbusch KSO 616, Technical Passport, Page: 50 / 92

50
TECHNICAL PASSPORT ENGLISH
Steam oven
6. Water Box Function
1. Press water box
and take it out.
2. Take out sealing gasket.
3. Add water.
1) Use unsuitable liquids will
damage the appliance. Do not use
distilled water, highly chlorinated tap
water(>40mg/I) or other liquids. Pure
water with a TDS value greater than 3
is suggested.
2) Before steam cooking:
Before starting the steam cooking
mode, if the tank is short of water, An
abnormal sound reminds you to add
water.
Note: Before starting the steam
cooking mode, please clean the water
tank .
3) During steam cooking:
During steam cooking mode, if the
tank is short of water, An abnormal
sound reminds you to add water. After
adding water, press , «keyągain and
then it can work normally.
4) After steam cooking:
1- After steam function is finished
, the water in boiler will be withdraw to
water tank. This process lasts for about
1 minute.
2- During the process to withdraw
the water back to water tank , if the
water tank is full , the system will sound
10 times to remind you clean up the
tank. After the water tank is empty, the
system will continue to withdraw water.
Note:
1)After steam cooking, please
remove the water from water tank.
If the water box is stuck, suck out the
water box with Sucker.
2) Due to vibration caused by
transportation, water box may be pop-
up status after opening the package.
Remember pushing it back.
7. Auto Cook
1) In standby mode, touch « A « key
once to activate auto menu mode.
2) Touch — or + or slide the
you can choose different types of
cooking menu. (A01 to A16)
3) Touch , , key to start cooking.
Note:
1) Cooking time or temperature can
not be set in the Auto Cook.
2) After steam auto menu, the
water pump will withdraw the water
back to water tank. There will be some
noise sound.
3) After steam auto menu, you
need to clean the water on cavity and
door panel.
4) Some menus include a Preheat
function, where the screen displays
Add water to here