Kuppersbusch IKD 10700.0, Service Manual

Page: 12 / 23

12 H5-60-69-01
For internal use only
4.1.4 Glass canopy
In the case of cooker hood designs IKD 10700.0 GE, IKDEM 10700.0 GE and IKDUM 10700.0 GE, it is
not possible to replace the canopy itself. Only the bottom part as a whole unit can be replaced.
It is only possible to replace the glass canopy in the case of models IKD 10800.0 GE,
IKDEM 10800.0 GE and IKDUM 10800.0 GE.
The cooker hood must be removed in order to replace the glass canopy.
- Subsequent to removing the cooker hood, remove the two
group sockets from the electronics unit and place the
appliance on the motor support.
- Remove the grease filter, and if present, the charcoal filter.
- Remove the four screws that connect the bottom part
(including the glass canopy) to the motor casing.
- Remove the bottom part. On doing so, take care not to
damage the two control element cables and the lamp.
- Now the glass canopy can be replaced.
Assembly is carried out in reverse order.