Kuppersbusch IKD 10700.0, Service Manual

Page: 11 / 23

H5-60-69-01 11
For internal use only
4.1.2 Motor
In order to remove the motor push the lower chimney upwards and secure it so that it cannot fall down.
Loosen the cable connections (mains lead and also, in the case of the IKDEM ... the cable connection
to the external motor), and loosen the exhaust air duct. Loosen the screws on the bottom part and on
the upper chimney and lower the bottom part down.
Loosen the motor screws and remove the motor towards the top. It may be necessary to remove the
electronics unit. In order to do so, the motor should still be installed. In order to remove the electronics
unit (see too “4.1.3 Electronics unit”), remove the two screws and pull out the two group sockets. You
will then be able to pull the unit out towards the front.
4.1.3 Electronics unit
In order to remove the electronics unit push the lower chimney
upwards and secure it so that it cannot fall down.
Remove the two group sockets and the two screws.
Then pull out the electronics unit towards the front (drawer
function).