16
H1-58-01-02-Ä
For internal use only
7.2.3
Power supply for the relay platinum: consistent 15 volts at the
connection
Measure
If one of the two voltages is not present or instable:
Exchange the mains connection
and/or, if necessary
exchange the voltage regulator
.
7.2.4
The honeycomb is difficult to operate
(the sensors activate the wrong honeycombs or none at all)
Measure
Exchange the EPROM.
Determine the honeycomb number. Burn the master and the slave again and replace.
Should exchanging the EPROM be unsuccessful, replace the entire electronics unit (see Universal
electronics unit).
Summary of Contents for ESW 308.6
Page 1: ...j j y a ko KHPFN...
