1.
Vacuum phase during which all the air
contained in the tank and in the pouch is
extracted.
During this phase, the symbol
is on.
2.
Sealing phase during which the pouch is
sealed.
During this phase, the symbol
is on.
3.
Stage of air inlet back into the tank.
During this phase, the symbol
is on.
PROGRAM SELECTION
To select a program, press the buttons
and .
STANDARD PROGRAM
This program allows you to set the vacuum
level and sealing time as follows:
1.
Press the button.
2.
The symbol
flashes. This means you
can change the vacuum level.
3.
Press the buttons
and
to set the
4.
Press the button again to confirm the
selection.
5.
The symbol
switches off and the
symbol
flashes. This means that the
sealing time can be changed.
6.
Press the buttons
and
to set the
chapter).
7.
Press the button again to confirm the
selection.
8.
The symbol
switches off.
9.
The packaging cycle can now be started
by pressing
.
This program allows you to set the vacuum
level, the sealing time and the number of
repetitions of the vacuum cycles as follows:
1.
Set the vacuum level according to the
standard program
2.
Set the sealing time according to the
standard program
3.
At this point, pressing the button again
to confirm the selection, the symbol
switches off
4.
The display shows the number of
repetitions of the standard packaging
cycle (5). By pressing the buttons
and
you may change the number of
repetitions from 2 to 15
5.
Press the button
to confirm the
selection
6.
The maturation cycle can now be started
by pressing
.
