Basic settings
28
User's guide
8. Basic settings
8.1. Setting the clock
The clock must be set before the appliance is used and
whenever power has been disconnected to the appliance.
In such cases «12.00» will blink in the display.
When the appliance is switched on, 12:00 will blink in the
display.
□
Turn the left selection switch to select an hour.
□
Turn the right selection switch to select the minutes.
□
Then con
fi
rm by pressing
. You will then need to
select the clock display. Use the right switch to choose
between the standard and the retro clock display.
□
Then con
fi
rm by pressing
.
□
An acoustic signal will sound and the appliance will
switch to the standby mode. The time that has been
set will be shown.
Should you wish to change the time:
With the appliance switched off, press the
symbol for
3 seconds and wait until the time setting is shown.
Summary of Contents for CD6350.0
Page 51: ......
