15
NEW GOLIA PLUS User Manual_
May 2013 Edition
Machine adjustment procedures
Centring the accessory disc
If fitted correctly (as outlined in number 5 on page 12), once the motor is running the accessory disc is centred and
locks automatically on the machine.
WARNING
Ensure the disc is positioned correctly to avoid eccentric oscillatory motion in the
machine.
Adjusting sanding direction
Do the following to change sanding direction on the floor:
1. Lower the handle to move the machine
to the left.
2. Raise the handle to move the machine to
the right.
3. Balance the handle to keep the machine
in the required position.
4.
Push the machine to make it go
forwards.
5.
Pull the machine to make it go
backwards.
Adjusting handle height
Do not
change the handle inclination when the machine is operating. This would compromise machine stability
and the safety of operators or other parties.
Routine maintenance to be performed
The machine does not require any maintenance to be carried out by the user. Contact an authorised technical
support centre for repairs, spare parts or accessories (the complete list of centres is on the company website
www.kunzletasin.com
in the Contact Us section) or the headquarters at Cinisello Balsamo, Via Cajkovskij 14
directly.
Spare parts
Always use K&T spare parts.
Failure to use K&T spare parts, or repairs/adjustments carried out by unauthorised personnel, will invalidate the
guarantee and any resulting liability.
The machine must only be repaired by qualified personnel.
This electric equipment is compliant with the
relevant safety legislation.
Repairs must be carried out by qualified personnel using K&T spare parts, otherwise the user may suffer serious
injury.
WARNING
Using spare parts other than those manufactured by K&T will invalidate the guarantee
for the product (or any of its parts).
All manuals and user guides at all-guides.com
